sbl16x0ct, sblf16x0ct, sblb16x0ct www.vishay.com vishay general semiconductor revision: 12-jun-13 1 document number: 88727 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual common cathode schottky rectifier features ? power pack ? guardring for overvoltage protection ? low power loss, high efficiency ? low forward voltage drop ? high forward surge capability ? high frequency operation ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c (for to-263ab package) ? solder bath tempera ture 275 c maximum, 10 s, per jesd 22-b106 (for to-220ab and ito-220ab package) ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc/dc converters, and polarity protection application. mechanical data case: to-220ab, ito-220ab, to-263ab molding compound meets ul 94 v-0 flammability rating ? base p/n-e3 - rohs-compliant, commercial grade ? base p/nhe3 - rohs-complia nt, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 2 x 8 a v rrm 30 v to 40 v i fsm 250 a v f 0.55 v t j max. 125 c package to-220ab, ito-220ab, to-263ab diode variations common cathode case pin 2 pin 1 pin 3 to-220ab sbl16x0ct ito-220ab sblb16x0ct pin 1 k pin 2 heatsink 1 2 3 1 2 k sblf16x0ct pin 2 pin 1 pin 3 to-263ab 1 2 3 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol sbl1630ct sbl1640ct unit maximum repetitive pe ak reverse voltage v rrm 30 40 v working peak reverse voltage v rwm 21 28 maximum dc blocking voltage v dc 30 40 maximum average forward rectified current ? at t c = 95 c total device i f(av) 16 a per diode 8.0 peak forward surge current 8.3 ms si ngle half sine-w ave superimposed on rated load per diode i fsm 250 operating junction and storage temperature range t j , t stg - 40 to + 125 c isolation voltage (ito-220a b only) from terminal to heatsink t = 1 min v ac 1500 v
sbl16x0ct, sblf16x0ct, sblb16x0ct www.vishay.com vishay general semiconductor revision: 12-jun-13 2 document number: 88727 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 40 ms note (1) aec-q101 qualified electrical characteristics (t c = 25 c unless otherwise noted) parameter symbol test conditions value unit maximum instantaneous forward voltage per diode v f (1) 8.0 a 0.55 v maximum instantaneous reverse current at dc blocking voltage per diode i r (2) rated v r t c = 25 c 0.5 ma t c = 100 c 50 thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol sbl sblf sblb unit typical thermal resistance from junction to case ? per diode r ? jc 2.0 4.0 2.0 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab SBL1630CT-E3/45 1.85 45 50/tube tube ito-220ab sblf1630ct-e3/45 1.99 45 50/tube tube to-263ab sblb1630ct-e3/45 1.35 45 50/tube tube to-263ab sblb1630ct-e3/81 1.35 81 800/reel tape and reel to-220ab sbl1630cthe3/45 (1) 1.85 45 50/tube tube ito-220ab sblf1630cthe3/45 (1) 1.99 45 50/tube tube to-263ab sblb1630cthe3/45 (1) 1.35 45 50/tube tube to-263ab sblb1630cthe3/81 (1) 1.33 81 800/reel tape and reel
sbl16x0ct, sblf16x0ct, sblb16x0ct www.vishay.com vishay general semiconductor revision: 12-jun-13 3 document number: 88727 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum no n-repetitive peak forward surge current per diode fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse characteristics per diode fig. 5 - typical junction capacitance per diode fig. 6 - typical transient thermal impedance per diode 0 4 8 12 20 0 50 100 150 16 resistive or inductive load average forward cu rrent (a) case temperature (c) 0 50 150 100 250 200 300 1 100 10 t j = t j max. 8.3 ms single half sine-wave n umber of cycles at 60 hz peak forward surge current (a) 100 10 1 0.1 0.01 0 0.2 0.1 0.6 1.1 1.2 0.4 0.3 0.7 0.8 0.9 0.5 1.0 t j = 125 c t j = 25 c pulse width = 300 s 1 % duty cycle instantaneous forward voltage (v) instantaneous forward current (a) 1 10 100 0.01 0.001 0.1 20 0 100 40 60 80 t j = 125 c t j = 25 c t j = 75 c percent of rated peak reverse voltage (%) instantaneous reverse current (ma) 1000 10 000 100 t j = 25 c f = 1.0 mhz v sig = 50 mv p-p 0.1 1 10 100 reverse voltage (v) junction capacitance (pf) 10 100 0.1 1 0.01 0.1 1 10 100 t - pulse duration (s) transient thermal impedance (c/w)
sbl16x0ct, sblf16x0ct, sblb16x0ct www.vishay.com vishay general semiconductor revision: 12-jun-13 4 document number: 88727 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) ? to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pi n 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 1 3 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pi n 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38) to-263ab mounting pad layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) mi n . 0.15 (3.81) mi n . 0.33 (8.38) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) mi n .
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: vishay: ? sbl1630ct/45? SBL1630CT-E3/45? sbl1630cthe3/45? sbl1640ct/45? sbl1640ct-e3/45? sbl1640cthe3/45? sblb1630ct/45? sblb1630ct/81? sblb1630ct-e3/45? sblb1630ct-e3/81? sblb1630cthe3/45? sblb1630cthe3/81? sblb1640ct/31? sblb1640ct/45? sblb1640ct/81? sblb1640ct-e3/31? sblb1640ct-e3/45 ? sblb1640ct-e3/81? sblb1640cthe3/45? sblb1640cthe3/81? sblf1630ct-e3/45? sblf1630cthe3/45? sblf1640ct-e3/45? sblf1640cthe3/45? sblb1630ct/31
|
